|
无损检测欧洲标准目录 |
|
CEN/TC 121 Welding，焊接 CEN/TR 15135:2005
Welding - Design and non-destructive testing of welds EN
12062:1997 Non-destructive examination of welds - General
rules for metallic materials EN
12517:1998 Non-destructive examination of welds -
Radiographic examination of welded joints - Acceptance levels EN
1289:1998 Non-destructive examination of welds - Penetrant testing
of welds - Acceptance levels EN
1290:1998 Non-destructive examination of welds - Magnetic particle
examination of welds EN
1291:1998 Non-destructive examination of welds - Magnetic particle
testing of welds - Acceptance levels EN
1435:1997 Non-destructive examination of welds - Radiographic
examination of welded joints EN
1711:2000 Non-destructive examination of welds - Eddy current
examination of welds by complex plane analysis EN
1712:1997 Non-destructive examination of welds - Ultrasonic
examination of welded joints - Acceptance levels EN
1713:1998 Non-destructive examination of welds - Ultrasonic
examination - Characterization of indications in welds EN
1714:1997 Non-destructive examination of welds - Ultrasonic
examination of welded joints
|
|
无损检测欧洲标准目录 |
|
CEN/TC 138 Non-destructive testing，无损检测 CEN
ISO/TS 21432:2005 Non-destructive testing - Standards test method for
determining residual stresses by neutron diffraction (ISO 21432:2005) CEN/TR
14748:2004 Non-destructive testing - Methodology for qualification of
non-destructive tests CEN/TS
15053:2005 Non-destructive testing - Recommendations for
discontinuities-types in test specimens for examination CR
13935:2000 Non-destructive testing - Generic NDE data format model EN
12084:2001 Non-destructive testing - Eddy current testing - General
principles and guidelines EN
12223:1999 Non-destructive testing - Ultrasonic examination -
Specification for calibration block No. 1 EN
12543-1:1999 Non-destructive testing - Characteristics of focal spots in
industrial X-ray systems for use in non-destructive testing - Part 1:
Scanning method EN
12543-2:1999 Non-destructive testing - Characteristics of focal spots in
industrial X-ray systems for use in non-destructive testing - Part 2:
Pinhole camera radiographic method EN
12543-3:1999 Non-destructive testing - Characteristics of focal spots in
industrial X-ray systems for use in non-destructive testing - Part 3:
Slit camera radiographic method EN
12543-4:1999 Non-destructive testing - Characteristics of focal spots in
industrial X-ray systems for use in non-destructive testing - Part 4:
Edge method EN
12543-5:1999 Non-destructive testing - Characteristics of focal spots in
industrial X-ray systems for use in non-destructive testing - Part 5:
Measurement of the effective focal spot size of mini and micro focus
X-ray tubes EN
12544-1:1999 Non-destructive testing - Measurement and evaluation of the
X-ray tube voltage - Part 1: Voltage divider method EN
12544-2:2000 Non-destructive testing - Measurement and evaluation of the
X-ray tube voltage - Part 2: Constancy check by the thick filter method EN
12544-3:1999 Non-destructive testing - Measurement and evaluation of the
X-ray tube voltage - Part 3: Spectrometric method EN
12668-1:2000 Non-destructive testing - Characterization and verification
of ultrasonic examination equipment - Part 1: Instruments EN
12668-2:2001 Non-destructive testing - Characterization and verification
of ultrasonic examination equipment - Part 2: Probes EN
12668-3:2000 Non-destructive testing - Characterization and verification
of ultrasonic examination equipment - Part 3: Combined equipment EN
12679:1999 Non-destructive testing - Determination of the size of
industrial radiographic sources - Radiographic method EN
13018:2001 Non-destructive testing - Visual testing - General principles EN
13068-1:1999 Non-destructive testing - Radioscopic testing - Part 1:
Quantitative measurement of imaging properties EN
13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2:
Check of long term stability of imaging devices EN
13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3:
General principles of radioscopic testing of metallic materials by X-
and gamma rays EN
13184:2001 Non-destructive testing - Leak testing - Pressure change
method EN
13185:2001 Non-destructive testing - Leak testing - Tracer gas method EN
13192:2001 Non destructive testing - Leak testing - Calibration of
reference leaks for gases EN
1330-1:1998 Non destructive testing - Terminology - Part 1: List of
general terms EN
1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used
in visual testing EN
1330-2:1998 Non destructive testing - Terminology - Part 2: Terms common
to the non-destructive testing methods EN
1330-3:1997 Non-destructive testing - Terminology - Part 3: Terms used
in industrial radiographic testing EN
1330-4:2000 Non destructive testing - Terminology - Part 4: Terms used
in ultrasonic testing EN
1330-5:1998 Non-destructive testing - Terminology - Part 5: Terms used
in Eddy current testing EN
1330-7:2005 Non-destructive testing - Terminology - Part 7: Terms used
in magnetic particle testing EN
1330-8:1998 Non-destructive testing - Terminology - Part 8: Terms used
in leak tightness testing EN
1330-9:2000 Non-destructive testing - Terminology - Part 9: Terms used
in acoustic emission testing EN
13477-1:2001 Non-destructive testing - Acoustic emission - Equipment
characterisation - Part 1: Equipment description EN
13477-2:2001 Non-destructive testing - Acoustic emission - Equipment
characterisation - Part 2: Verification of operating characteristic EN
13554:2002 Non-destructive testing - Acoustic emission - General
principles EN
13625:2001 Non-destructive testing - Leak test - Guide to the selection
of instrumentation for the measurement of gas leakage EN
13860-1:2003 Non destructive testing - Eddy current examination -
Equipment characteristics and verification - Part 1: Instrument
characteristics and verification EN
13860-2:2003 Non-destructive testing - Eddy current examination -
Equipment characteristics and verification - Part 2: Probe
characteristics and verification EN
13860-3:2003 Non-destructive testing - Eddy current examination -
Equipment characteristics and verification - Part 3: System
characteristics and verification EN
13925-1:2003 Non-destructive testing - X-ray diffraction from
polycrystalline and amorphous material - Part 1: General principles EN
13925-2:2003 Non-destructive testing - X-ray diffraction from
polycrystalline and amorphous materials - Part 2: Procedures EN
13925-3:2005 Non destructive testing - X ray diffraction from
polycrystalline and amorphous materials - Part 3: Instruments EN
13927:2003 Non-destructive testing - Visual testing - Equipment EN
14096-1:2003 Non-destructive testing - Qualification of radiographic
film digitisation systems - Part 1: Definitions, quantitative
measurements of image quality parameters, standard reference film and
qualitative control EN
14096-2:2003 Non-destructive testing - Qualification of radiographic
film digitisation systems - Part 2: Minimum requirements EN
14127:2004 Non-destructive testing - Ultrasonic thickness measurement EN
14584:2005 Non-destructive testing - Acoustic emission - Examination of
metallic pressure equipment during proof testing - Planar location of AE
sources EN
14784-1:2005 Non-destructive testing - Industrial computed radiography
with storage phosphor imaging plates - Part 1: Classification of systems EN
14784-2:2005 Non-destructive testing - Industrial computed radiography
with storage phosphor imaging plates - Part 2: General principles for
testing of metallic materials using X-rays and gamma rays EN
1518:1998 Non-destructive testing - Leak testing - Characterization of
mass spectrometer leak detectors EN
1593:1999 Non-destructive testing - Leak testing - Bubble emission
techniques EN
1779:1999 Non-destructive testing - Leak testing - Criteria for method
and technique selection EN
25580:1992 Non-destructive testing - Industrial radiographic
illuminators - Minimum requirements (ISO 5580:1985) EN
27963:1992 Welds in steel - Calibration block No. 2 for ultrasonic
examination of welds (ISO 7963:1985) EN
444:1994 Non-destructive testing - General principles for radiographic
examination of metallic materials by X- and gamma-rays EN
462-1:1994 Non-destructive testing - Image quality of radiographs - Part
1: Image quality indicators (wire type) - Determination of image quality
value EN
462-2:1994 Non-destructive testing - Image quality of radiographs - Part
2: Image quality indicators (step/hole type) - Determination of image
quality value EN
462-3:1996 Non-destructive testing - Image quality of radiographs - Part
3: Image quality classes for ferrous metals EN
462-4:1994 Non-destructive testing - Image quality of radiographs - Part
4: Experimental evaluation of image quality values and image quality
tables EN
462-5:1996 Non-destructive testing - Image quality of radiographs - Part
5: Image quality indicators (duplex wire type), determination of image
unsharpness value EN
473:2000 Non destructive testing - Qualification and certification of
NDT personnel - General principles EN
571-1:1997 Non destructive testing - Penetrant testing - Part 1: General
principles EN
583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1:
General principles EN
583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2:
Sensitivity and range setting EN
583-3:1997 Non-destructive testing - Ultrasonic examination - Part 3:
Transmission technique EN
583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4:
Examination for discontinuities perpendicular to the surface EN
583-5:2000 Non-destructive testing - Ultrasonic examination - Part 5:
Characterization and sizing of discontinuities EN
584-1:1994 Non destructive testing - Industrial radiographic film - Part
1: Classification of film systems for industrial radiography EN
584-2:1996 Non destructive testing - Industrial radiographic film - Part
2: Control of film processing by means of reference values EN ISO
12706:2000 Non-destructive testing - Terminology - Terms used in
penetrant testing (ISO 12706:2000) EN ISO
3059:2001 Non-destructive testing - Penetrant testing and magnetic
particle testing - Viewing conditions (ISO 3059:2001) EN ISO
3452-2:2000 Non-destructive testing - Penetrant testing - Part 2:
Testing of penetrant materials (ISO 3452-2:2000) EN ISO
3452-3:1998 Non-destructive testing - Penetrant testing - Part 3:
Reference test blocks (ISO 3452-3:1998) EN ISO
3452-4:1998 Non-destructive testing - Penetrant testing - Part 4:
Equipment (ISO 3452-4:1998) EN ISO
9934-1:2001 Non-destructive testing - Magnetic particle testing - Part
1: General principles (ISO 9934-1:2001) EN ISO
9934-2:2002 Non-destructive testing - Magnetic particle testing - Part
2: Detection media (ISO 9934-2:2002) EN ISO
9934-3:2002 Non-destructive testing - Magnetic particle testing - Part
3: Equipment (ISO 9934-3:2002) ENV
583-6:2000 Non-destructive testing - Ultrasonic examination - Part 6:
Time-of-flight diffraction technique as a method for detection and
sizing of discontinuities
|
|
无损检测欧洲标准目录 |
|
ECISS/TC 2 Steel - Physico-chemical and non-destructive testing，钢/物理-化学和无损检测 EN 10160:1999 Ultrasonic testing of steel
flat product of thickness equal or greater than 6 mm (reflection method) EN 10306:2001 Iron and steel - Ultrasonic
testing of H beams with parallel flanges and IPE beams EN 10307:2001 Non-destructive testing -
Ultrasonic testing of austenitic and austenitic-ferritic stainless
steels flat products of thickness equal to or greater than 6 mm
(reflection method) EN 10308:2001 Non destructive testing -
Ultrasonic testing of steel bars
|
|
无损检测欧洲标准目录 |
|
ECISS/TC 28 Steel forgings，锻钢件 EN 10228-1:1999 Non-destructive testing
of steel forgings - Part 1: Magnetic particle inspection EN 10228-2:1998 Non-destructive testing
of steel forgings - Part 2: Penetrant testing EN 10228-3:1998 Non-destructive testing
of steel forgings - Part 3: Ultrasonic testing of ferritic or
martensitic steel forgings EN 10228-4:1999 Non-destructive testing
of steel forgings - Part 4: Ultrasonic testing of austenitic and
austenitic-ferritic stainless steel forgings
|
|
无损检测欧洲标准目录 |
|
ECISS/TC 29 Steel tubes and fittings for steel tubes，钢管 EN 10246-1:1996 Non destructive testing
of steel tubes - Part 1: Automatic electromagnetic testing of seamless
and welded (except submerged arc welded) ferromagnetic steel tubes for
verification of hydraulic leak-tightness EN 10246-10:2000 Non-destructive testing
of steel tubes - Part 10: Radiographic testing of the weld seam of
automatic fusion arc welded steel tubes for the detection of
imperfections EN 10246-11:2000 Non-destructive testing
of steel tubes - Part 11: Liquid penetrant testing of seamless and
welded steel tubes for the detection of surface imperfections EN 10246-12:2000 Non-destructive testing
of steel tubes - Part 12: Magnetic particle inspection of seamless and
welded ferromagnetic steel tubes for the detection of surface
imperfections EN 10246-13:2000 Non-destructive testing
of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness
testing for seamless and welded (except submerged arc welded) steel
tubes EN 10246-14:1999 Non-destructive testing
of steel tubes - Part 14: Automatic ultrasonic testing of seamless and
welded (except submerged arc-welded) steel tubes for the detection of
laminar imperfections EN 10246-15:2000 Non-destructive testing
of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate
used in the manufacture of welded steel tubes for the detection of
laminar imperfections EN 10246-16:2000 Non-destructive testing
of steel tubes - Part 16: Automatic ultrasonic testing of the area
adjacent to the weld seam of welded steel tubes for the detection of
laminar imperfections EN 10246-17:2000 Non-destructive testing
of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless
and welded steel tubes for the detection of laminar imperfections EN 10246-18:2000 Non-destructive testing
of steel tubes - Part 18: Magnetic particle inspection of tube ends of
seamless and welded ferromagnetic steel tubes for the detection of
laminar imperfections EN 10246-2:2000 Non-destructive testing
of steel tubes - Part 2: Automatic eddy current testing of seamless and
welded (except submerged arc-welded) austenitic and austenitic-ferritic
steel tubes for verification of hydraulic leak-tightness EN 10246-3:1999 Non-destructive testing
of steel tubes - Part 3: Automatic eddy current testing of seamless and
welded (except submerged arc-welded) steel tubes for the detection of
imperfections EN 10246-4:1999 Non-destructive testing
of steel tubes - Part 4: Automatic full peripheral magnetic
transducer/flux leakage testing of seamless ferromagnetic steel tubes
for the detection of transverse imperfections EN 10246-5:1999 Non-destructive testing
of steel tubes - Part 5: Automatic full peripheral magnetic
transducer/flux leakage testing of seamless and welded (except submerged
arc welded) ferromagnetic steel tubes for the detection of longitudinal
imperfections EN 10246-6:1999 Non-destructive testing
of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of
seamless steel tubes for the detection of transverse imperfections EN 10246-7:1996 Non destructive testing
of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of
seamless and welded (except submerged arc welded) steel tubes for the
detection of longitudinal imperfections EN 10246-8:1999 Non-destructive testing
of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam
of electric welded steel tubes for the detection of longitudinal
imperfections EN 10246-9:2000 Non-destructive testing
of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam
of submerged arc welded steel tubes for the detection of longitudinal
and/or transverse imperfections EN 10256:2000 Non-destructive testing of
steel tubes - Qualification and competence of level 1 and 2
non-destructive testing personnel
|
|
|
2005/09/08